Install Mosquitto MQTT: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 8: | Line 8: | ||
== Git Install == | == Git Install == | ||
Currently I install the old rpm 1.4.10 for leap 42.2 to get the opensuse infrastructure. | |||
Then I install the latest tagged git version over it (need to adapt dest path to /usr in config.mk before calling make). | |||
cd ~/workspace | cd ~/workspace | ||
| Line 19: | Line 22: | ||
== Configuration == | == Configuration == | ||
Only needed if options need to be changed from defaults (e.g for TLS cert or PSK encryption). | |||
Better use the opensuse pattern of adding conf files in /etc/mosquitto/mosquitto.conf.d | |||
sudo cp /etc/mosquitto/mosquitto.conf.example /etc/mosquitto/mosquitto.conf | sudo cp /etc/mosquitto/mosquitto.conf.example /etc/mosquitto/mosquitto.conf | ||
== Example == | |||
Use Arduino IDE to flash ESP-12e NodeMCU with PubSubClient mqtt_esp8266 example. | |||
LED_BUILTIN does not work on newer NodeMCU, simply use (GPIO 0)2. | |||
Latest revision as of 00:45, 31 July 2017
Mosquitto Installation
Prerequisites
sudo zypper in libcares-devel docbook-xsl-stylesheets cd /usr/share/xml/docbook/stylesheet sudo ln -s nwalsh/current docbook-xsl
Git Install
Currently I install the old rpm 1.4.10 for leap 42.2 to get the opensuse infrastructure. Then I install the latest tagged git version over it (need to adapt dest path to /usr in config.mk before calling make).
cd ~/workspace git clone https://github.com/eclipse/mosquitto.git cd mosquitto git tag git checkout v1.4.14 make sudo make install
Configuration
Only needed if options need to be changed from defaults (e.g for TLS cert or PSK encryption). Better use the opensuse pattern of adding conf files in /etc/mosquitto/mosquitto.conf.d
sudo cp /etc/mosquitto/mosquitto.conf.example /etc/mosquitto/mosquitto.conf
Example
Use Arduino IDE to flash ESP-12e NodeMCU with PubSubClient mqtt_esp8266 example. LED_BUILTIN does not work on newer NodeMCU, simply use (GPIO 0)2.