Update Marlin Firmware of Anycubic Kossel Pulley

Anycubic Kossel Pulley

Current Environment

• TriGorilla Board, based on AtMega 2560
• Marlin 1.1.9, selfcompiled for RGB support

Parameters

• Latest Marlin (2.0.5.3)
• PlatformIO 4.3.4
• OpenSuse 15.1

Prepare

mkdir ~/git
cd ~/git

git clone https://github.com/MarlinFirmware/Configurations.git marlin-config
cd marlin-config
git checkout 2.0.5.3
cd -
git clone https://github.com/MarlinFirmware/Marlin.git marlin
cd marlin
git checkout 2.0.5.3
cd -

Configure

cd ~/git/marlin/Marlin/
ln -sf ../../marlin-config/config/examples/delta/Anycubic/Kossel/Configuration.h .
ln -sf ../../marlin-config/config/examples/delta/Anycubic/Kossel/Configuration_adv.h .