Update Marlin Firmware of Anycubic Kossel Pulley

Current Environment

• TriGorilla Board, based on AtMega 2560
• Marlin 1.1.9, selfcompiled for RGB support

Parameters

• Latest Marlin (2.0.5.3)
• PlatformIO 4.3.4
• OpenSuse 15.1

Documentation

• https://marlinfw.org/docs/basics/install.html
• https://marlinfw.org/docs/basics/install_platformio.html
• https://marlinfw.org/docs/basics/install_platformio_vscode.html

Prepare

mkdir ~/git
cd ~/git

git clone https://github.com/MarlinFirmware/Configurations.git marlin-config
cd marlin-config
git checkout 2.0.5.3
cd -
git clone https://github.com/MarlinFirmware/Marlin.git marlin
cd marlin
git checkout 2.0.5.3
cd -

Configure

Generic Anycubic Kossel

cd ~/git/marlin/Marlin/
ln -sf ../../marlin-config/config/examples/delta/Anycubic/Kossel/Configuration.h .
ln -sf ../../marlin-config/config/examples/delta/Anycubic/Kossel/Configuration_adv.h .

My Diff in Configuration.h

Identification, remote control, heatbed, z-probe, rgbw and sensor as used on my pulley

diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h
index 948fd38e..bfb3f963 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -28,13 +28,13 @@
 //#define ANYCUBIC_KOSSEL_PLUS
 
 // Anycubic Probe version 1 or 2 see README.md; 0 for no probe
-#define ANYCUBIC_PROBE_VERSION 0
+#define ANYCUBIC_PROBE_VERSION 1
 
 // Heated Bed:
 // 0 ... no heated bed
 // 1 ... aluminium heated bed with "BuildTak-like" sticker
 // 2 ... ultrabase heated bed
-#define ANYCUBIC_KOSSEL_ENABLE_BED 0
+#define ANYCUBIC_KOSSEL_ENABLE_BED 1
 
 /**
  * Configuration.h
@@ -86,7 +86,7 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "@brandstaetter, @grbd" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "@joba-1 250kbd" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
 /**
@@ -136,7 +136,7 @@
  *
  * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
  */
-#define BAUDRATE 115200
+#define BAUDRATE 250000
 
 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
@@ -1781,7 +1781,7 @@
  *
  * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek','el_gr':'Greek  (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian',  'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST'  }
 * /
-#de fine LCD_LANGUAGE en
+#de fine LCD_LANGUAGE de
 
 /**
  * LCD Character Set
@@ -2354,14 +2354,14 @@
  * LED Type. Enable only one of the following two options.
  *
  */
-//#define RGB_LED
-//#define RGBW_LED
+// #define RGB_LED
+#define RGBW_LED

 #if EITHER(RGB_LED, RGBW_LED)
-  //#define RGB_LED_R_PIN 34
-  //#define RGB_LED_G_PIN 43
-  //#define RGB_LED_B_PIN 35
-  //#define RGB_LED_W_PIN -1
+  #define RGB_LED_R_PIN  6
+  #define RGB_LED_G_PIN  5
+  #define RGB_LED_B_PIN 11
+  #define RGB_LED_W_PIN  4
 #endif
 
 // Support for Adafruit Neopixel LED driver
@@ -2409,6 +2409,8 @@
  * Leave undefined or set to 0 to entirely disable the servo subsystem.
  */
 //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
+#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command
+#define SERVO0_PIN 12 // default pin 11 used for RGB LED
 
 // (ms) Delay  before the next move will start, to give the servo time to reach its target angle.
 // 300ms is a good value but you can try less delay.

Edit in platformio.ini

Since my notebook has more than one usb serial port, I needed to tell platformio which one connects to the printer:

[env:mega2560]
...
upload_port = /dev/ttyUSB1