Project Raspberry PI

Raspberry PI

Bezugsquellen

• [Raspberry PI Starter Kit]
• [PiCan CAN Bus and power supply]

Kernel kompilieren

Die Infos kommen von [eLinux]. Dort ggf. nach Neuigkeiten suchen.

Das Zielverzeichnis braucht im Moment 6.1 GB. Dauer der Builds (ohne git Downloads):

* auf job1:/data3/rpi ca. 9 Minuten
* auf job4:/dev/shm/rpi ca. 5 Minuten

export RPI_DIR=/data3/rpi
mkdir -p "$RPI_DIR"
cd "$RPI_DIR"

git clone https://github.com/raspberrypi/linux
export KERNEL_SOURCE="$RPI_DIR/linux"

git clone https://github.com/raspberrypi/tools
export CCPREFIX="$RPI_DIR/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian-x64/bin/arm-linux-gnueabihf-"

git clone git://github.com/raspberrypi/firmware.git

cd linux
make mrproper
cp -av arch/arm/configs/bcmrpi_defconfig .config
make ARCH=arm CROSS_COMPILE=${CCPREFIX} olddefconfig
cp -av .config ../bcmrpi_defconfig-plus-oldconfig-and-defaults
make ARCH=arm CROSS_COMPILE=${CCPREFIX} -j9
make ARCH=arm CROSS_COMPILE=${CCPREFIX} modules

export MODULES_TEMP="$RPI_DIR/modules-temp"
mkdir -p "$MODULES_TEMP"
make ARCH=arm CROSS_COMPILE=${CCPREFIX} INSTALL_MOD_PATH=${MODULES_TEMP} modules_install