Update Marlin Firmware of Anycubic Kossel Pulley

From JoBaPedia
Revision as of 12:25, 26 June 2020 by Joachim (talk | contribs) (Created page with "= Anycubic Kossel Pulley = == Current Environment == * TriGorilla Board, based on AtMega 2560 * Marlin 1.1.9, selfcompiled for RGB support == Parameters == * Latest Marlin...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Anycubic Kossel Pulley

Current Environment

  • TriGorilla Board, based on AtMega 2560
  • Marlin 1.1.9, selfcompiled for RGB support

Parameters

  • Latest Marlin (2.0.5.3)
  • PlatformIO 4.3.4
  • OpenSuse 15.1

Prepare

mkdir ~/git
cd ~/git

git clone https://github.com/MarlinFirmware/Configurations.git marlin-config
cd marlin-config
git checkout 2.0.5.3
cd -
git clone https://github.com/MarlinFirmware/Marlin.git marlin
cd marlin
git checkout 2.0.5.3

Configure

ln -sf ~/git/marlin-config/config/examples/delta/Anycubic/Kossel/Configuration.h ~/git/marlin/Marlin/
ln -sf ~/git/marlin-config/config/examples/delta/Anycubic/Kossel/Configuration_adv.h ~/git/marlin/Marlin/
Retrieved from "https://banzhaf.chickenkiller.com/mediawiki/index.php?title=Update_Marlin_Firmware_of_Anycubic_Kossel_Pulley&oldid=14628"